How to Make a Raspberry Pi Work-From-Home Status Indicator


If you’re working from home and have kids or a partner around, you’ve probably had them barge into your home office when you were in the middle of an important meeting. Do you wish your family would visit you at more convenient times during the work day? In this tutorial, we’ll set up a method to show your work status (busy or available or “in a meeting”) on a LCD screen you can hang outside your door.

How does it work? 

When you’re done, you’ll be able to update your status screen from a browser window on your PC. You’ll navigate to your local lcd.html page and then click a button to change the status. 

(Image credit: Tom's Hardware)

For example, if you click “In a meeting”

Your LCD screen will read: “In a meeting as of 2:12 pm” (2:12 pm represents a timestamp when you clicked the button)

(Image credit: Tom's Hardware)

Below are messages included in the sample code, but you can change the messages to suit your needs.

  • Status: Available
  • Status: Busy
  • Status: Away
  • On the phone
  • In a meeting
  • On a video call
  • Grading papers

(Image credit: Tom's Hardware)

What you’ll need: 

(Image credit: Tom's Hardware)

Optional: You can 3D print a case for your Raspberry Pi and LCD screen here. 

This enclosure requires 8 and picture hanging hardware. 

(Image credit: Tom's Hardware)

Part 1: Hardware Assembly 

In this section, we will connect the Raspberry Pi to the LCD screen and turn on our Raspberry Pi. 

(Image credit: Tom's Hardware)

From the I2C backpack on the LCD screen (using 4 female-to-female jumper wires)

  1. Connect GND to a ground pin on the Raspberry Pi.
  2. Connect VCC to 5V (pin 2) on the Raspberry Pi.
  3. Connect the SDA to pin 3 on the Raspberry Pi.
  4. Connect the SCL to pin 5 on the Raspberry Pi.

Standard Raspberry Pi Setup

  1. Insert microSD card formatted with the Raspberry Pi OS.
  2. Connect keyboard, mouse, and monitor to your Raspberry Pi.
  3. Connect your power supply to your Raspberry Pi.

Optional Case

There is an . . The case is fitted for a Raspberry Pi Zero W with headers.

1. Push the Raspberry Pi Zero W into the bottom of the case fitted into the 4 pins.

2. Using 4 M2.5 screws, attach the LCD screen to the lid / front of the case,

In order to fit the wires and the LCD screen with the I2C backpack into the case, I slightly bent the pins of the I2C backpack outwards and then inserted the 4 female-to-female wires.

3. Delay securing the lid to the case until after the LCD screen contrast is adjusted later in this tutorial. Delay securing the lid to the case until after the LCD screen contrast is adjusted later in this tutorial. 

(Image credit: Tom's Hardware)

Part 2: Setup the LCD Display 

In this section we will set up our HQ camera to take photos.

1. Boot your Raspberry Pi. If you don’t already have a microSD card see our article on  or how to do a .

2. Open the Raspberry Pi Configuration tool from the Preferences menu in the Raspberry Pi OS GUI.

3. Enable ‘I2C’ on the Interfaces tab.

(Image credit: Tom's Hardware)

4. Click OK to close the window.

5. Open a Terminal. You can do that by hitting CTRL + T.

6. Clone this repository:

git clone

7. Navigate to the directory you just created 


8. Test your setup by entering in the Terminal 


(Image credit: Tom's Hardware)

9.  Adjust the contrast dial on the back of the screen using a screwdriver, until you’re comfortable with the output. 

(Image credit: Tom's Hardware)

You should now see text across the LCD screen that reads “Welcome to Tom’s Hardware!” 

(Image credit: Tom's Hardware)

Optional: As a side project, I’ve included the code for a digital clock display. After running the code, in the terminal now enter python and view the current time on your LCD display.

If the time displayed on your LCD screen is incorrect, go to your Raspberry Pi Configuration (as in Step 2), Localisation tab and click “Set Timezone” to your time zone. 

Part 3: Messaging & API Setup 

In this section, we will test and set up the work status indicators.

1. Navigate to the WFH_LCD folder in your file manager.  Open in Geany or Thonny.

2. Run code by clicking the paper airplane icon in Geany or the Run button in Thonny.

(Image credit: Tom's Hardware)

You should now see various status messages display on your LCD screen for 2 seconds each. 

3. Press CTRL+C when you want to stop the messages.  

(Image credit: Tom's Hardware)

Code notes about

  • The command mylcd.lcd_display_screen refers to the file that was included in the github package
  • On your LCD screen, there are 2 lines containing 16 characters per line.
  • mylcd.lcd_display_string(“Welcome to”, 1) instructs the Pi to display “Welcome to” on the first line of the LCD display. The first parameter is the text and the second parameter is the line number for the LCD screen. If your string (1st parameter) is longer than 16 characters only the first 16 characters will display on your LCD screen.
  • Function currentTime() takes the current time and formats it to Hour:Minute AM/PM string, i.e. ‘9:34 AM’
  • If the time that displays is incorrect, please go to Raspberry Pi Configuration -> Localisation tab and “Set Timezone” to your time zone.
  • sleep(2) tells your Pi to display each message for 2 seconds before moving forward.
  • mylcd.lcd_clear() tells your Pi to clear the LCD. 

Back to the tutorial:

4. Optional: Now you can change the text to messages of your choice.

5. Run your updated code to see your text across the LCD screen.

6. Open for editing in Geany or Thonny. You’ll find it in the WFH_LCD folder in your file manager.

7. Run code by clicking the paper airplane icon in Geany or the Run button in Thonny. The LCD screen should not change at this point. 

(Image credit: Tom's Hardware)

8. Launch your Chromium browser.

9. Navigate to “http://raspberrypi:5000/api/busy” (assuming “raspberrypi” is your hostman) Your LCD screen should update to “Status: Busy” with the Pi’s current time.  

(Image credit: Tom's Hardware)

Code notes about

  • This Python code creates APIs that you can call from another device on your network. To test this, go to your desktop computer, type in the hostname of your Pi followed by “:5000/api/busy” (ex: http://raspberrypi:5000/api/busy) to see the LCD screen text change to “Status: Busy”
  • For example, if your Pi’s hostname is raspberrypi (the default hostname), enter the following URL in the browser of your desktop computer “http://raspberrypi:5000/api/away” and the LCD screen text will now read “Status: Away”
  • The code “@app.route('/api/available', methods=['GET'])” tells the Pi to map ‘/api/available’ to run the function switchAvailable() using a REST API GET request
  • The function switchAvailable() sets the text on the LCD screen similar to what you saw in

(Image credit: Tom's Hardware)

At this point, you can customize the LCD text functions to statuses that are appropriate for your purposes, making note of the API names that you may change, add, or delete.

For example, If you add a function for ‘Writing a book,’ then you would need to create an API call, perhaps ‘api/book’ to

Don’t forget to test all of your API calls in Chromium before moving onto the next step.

URLs to test in Chromium

  • http://raspberrypi:5000/api/available
  • http://raspberrypi:5000/api/busy
  • http://raspberrypi:5000/api/away
  • http://raspberrypi:5000/api/meeting
  • http://raspberrypi:5000/api/phone
  • http://raspberrypi:5000/api/grading
  • http://raspberrypi:5000/api/email
  • http://raspberrypi:5000/api/video
  • http://raspberrypi:5000/api/th
  • http://raspberrypi:5000/api/clear

Testing your API calls individually can be tedious. What if we created a website with a button to click for each API instead? We’ll do that in the next step. 

Part 4: Updating your Pi from your Desktop & Setting the Python script to run on boot 

Important Note: Your desktop computer and your Raspberry Pi must both be connected to the same WiFi network in this step.

1. If you made changes to in the previous step by adding or removing buttons, you’ll need to make corresponding changes to your html file. To do this, from your file manager, go to /home/pi/WFH_LCD/templates and right click on lcd.html. Select ‘Geany’ as your editing tool. If you added an API call in, then you will need to add a corresponding button, api call, and function in lcd.html.

(Image credit: Tom's Hardware)

Code Notes on lcd.html 

  • There are 3 main sections in this HTML document. 
  • Section 1 creates graphical buttons for each of the status entries. 
  • Section 2 maps the API calls to variables. 
  • Section 3 is a list of functions that execute when a button is pressed to make the API call and note the last clicked status on the webpage.

Back to the tutorial: 

2. You may need to stop and restart from Geany or Thonny. Please ensure is running before moving onto the next step.

3. Navigate to  in Chromium (if you use that instead of “http://raspberrypi.”)

4. Click on each button to test your API calls again. 

(Image credit: Tom's Hardware)

5. Now head over to your desktop internet browser and navigate to:

6. Click on any of the status buttons and watch your Pi’s LCD text change.

(Image credit: Tom's Hardware)

Now let’s go back to our Raspberry Pi and set code to run on boot. 

1. Open a Terminal

2. Enter code

sudo nano /home/pi/.bashrc

3. Enter the following text at the bottom of .bashrc 

python /home/pi/WFH_LCD/

4. Hit Ctrl-X to exit and Y to save.

5. Reboot your Pi. 

(Image credit: Tom's Hardware)

Once your Pi reboots, it should automatically run python script every time.